|
Post by alliskid on Aug 12, 2009 21:03:15 GMT -4
Hi, everyone.
I am looking to restore a allis chamlers Model C or B, for a tribute to my grandfather since he had one growing up and I would like to restore one its original condition. I have restored one tractor before (John Deere Model H which sat on a fencerow for 25 years) with a 4-H group last year, so I have some sort of an idea on what I am doing. So which Model Is best?
Anyone know where to find them in ontario?
Also I have one more question, what would it cost to fully restore a B or C Model from poor condition (not really working) to its original condition?
Thanks Guys
|
|
|
Post by indiana on Aug 13, 2009 9:40:33 GMT -4
I DON'T THINK IT WILL MAKE MUCH DIFFERENCE ON THE B OR C, AS THEY ARE THE SAME TRACTOR EXCEPT THE B HAS A WIDE FRONT AND THE C HAS A NARROW FRONT. AS FOR HOW MUCH THE COST WOULD BE, YOU CAN INVEST FROM VERY LITTLE IF DOING ALL THE WORK TO 4 OR 5 THOUSAND IF PAYING SOMEONE ELSE. INDIANA
|
|
|
Post by outlook6 on Aug 13, 2009 10:26:23 GMT -4
I agree with Indiana, a B or C will take about the same amount of effort and money. You might want to consider what I'm doing. I have two '39 B's, one of which I'm restoring, the other is being cannibalized for parts. I got the parts tractor cheap and it has much better sheet metal.
How much it will cost is a function of what the condition is of what you start with and what you have to repair or replace - an engine rebuild for instance. Another example, after completely disassembling the transmission/transfer case on my B, I determined that virtually all of the bearing, races, and oil seals need to be replaced. Based on the best prices I could find on the internet, the cost for these alone will be well over $400.00.
But, this is a hobby for me and as long as I'm having fun, I'm not going to get overly concerned about the cost. A lot of the fun is searching for and finding "good deals" for the parts you need.
In any case, go for it and have fun. Jim
|
|
|
Post by tim52160 on Aug 15, 2009 13:58:33 GMT -4
i dont think it matter what model. First determine your $ range for buying and restoring. Then are you more interested in doing mechanical or body work.is it going to be a working tractor or a trailor queen? Either way be safe and have fun!
|
|
|
Post by jeffny on Aug 23, 2009 11:40:48 GMT -4
Take as long as you can. It is alot of fun. When it's finished you will be lost and wish the job lasted longer. I like to strech these jobs out over several years.
|
|