|
Post by D-allis IA on Mar 11, 2010 17:23:48 GMT -4
|
|
|
Post by raiken on Mar 12, 2010 7:14:09 GMT -4
Our snow has been gone for 3 days. As far as what I have on the back burner, I have two back burners. It is consignment sale time , will have to get through that first.
|
|
jon
New Member
Posts: 33
|
Post by jon on Mar 12, 2010 7:32:00 GMT -4
Finally put the D17G together and fine tuning it. Have the wide front WD apart now getting new rod and main bearings. Will put in 41/8 sleeves and pistons that I have extra. Then I will see if there is any money left.
|
|
noly
New Member
Posts: 2
|
Post by noly on Jun 11, 2010 19:30:54 GMT -4
all of my stuff seems to be back burner, 1942 WC runs minor oil leaks,needs left axle seal and brake band / 2btm pull type plow rusty but works / 1950 WD marks its territory real well, paint rough but original, front wheel weights. runs real good very dependable with pin hitch pick up plow 2-16s / 1954 WD 45 original paint, 3-14 sc plow neighbor had since 1957, leaks oil generator does not work will replace with alt when time permit, wide front has loader and front blade.
1935 Allis U the money pit. bought 4 yrs ago new water pump new clutch new rear wheel brgs new front wheel brgs and seals rebuild magneto rebuild front axle new pivot pin in center new king pins front tires triple rib really weather checked bad, waiting on funding, will replace with single rib rear tires the continuous tread style very weather checked but still hold air i am sure I forgot something else that cost $$$$ but am scared to add it all up lol
1957 WD45 NF with factory power steering, motor bad, tractor has a hard but short life, bought as parts tractor missing seat and bracket, brake covers missing, ,NF axle and hubs missing,
1939 WC mainly parts tractor needs engine,has spoke front wheels,steel wheels on rear.
1969 B 210 needs variable speed belt, 42 inch mower deck needs spindle bearings, looking for a 42 inch snow blower
currently money is the main shortage
|
|
|
Post by Stanohio on Jul 13, 2010 9:37:25 GMT -4
I have so much on back burner I need 2 big restaurant stoves and I'm not sure that's enough!
|
|