|
Post by caron40in on Dec 24, 2009 19:05:52 GMT -4
|
|
|
Post by D-allis IA on Dec 25, 2009 1:48:13 GMT -4
Ron We had a loader that looked a lot like that on a WD Allis years ago.It really looks great. The loader we had was held up when the loader is off by legs near where the trip lever is. You attached the legs with a pin. I think I see the spot.
|
|
|
Post by caron40in on Dec 25, 2009 11:12:14 GMT -4
yea, there is a spot for legs, they were missing when I got the loader. Finding some originals would be tough, the loader was hard enough to find. I think I can make or have some made with little effort. Looks like a piece of steel tubing and some angle iron and I'm in business.
|
|
|
Post by D-allis IA on Dec 25, 2009 17:47:47 GMT -4
Ron if I remember right our stands were round pipe with a small bend in it. On the bottom was a square plate welded on it so it would not sink into the ground. I really like your unit. All AC.
|
|
|
Post by johnnytripntrot on Aug 13, 2012 17:21:41 GMT -4
I have a loader like that if anyone is Interseted
|
|
|
Post by allorange81 on Nov 18, 2014 10:04:46 GMT -4
Johnnytripntrot, do you still have the CA loader if so were are you located
|
|